HOME   INTRO   HISTORY   PRODUCTS   NEWS

TFA SURFACE MOUNTED
POWER ATTENUATORS

Download
PDF File

1.5GHz-30W and 4GHz-1/4W surface mounted, small  attenuators of 50 ohm characteristic impedance.
The TFA68D, 1.5GHz-30W, which attaches to heart sink directly, are Pb and BeO free.  The TFA68D has
power consumption durability in power isolators and circulators.  The TFA53S and TFA54D 4GHz are
1/4W and durable  against pulse and EMI accidents in small signal applications. With face down configuration
on a strip line, these models show excellent return loss characteristics.  These models also exhibit long life and
temperature stability at a temperature range from -55C to +155C.  Applications include:  Gain control circuits,
isolation circuits in power boost amplifiers, loss compensation of transmission line of data communication
systems, detection signal control of ATE, LSI test systems and circuit board functional test systems, industrial
measurement electronics, medical scientific electronics and miscellaneous communication systems.

GENERAL SPECIFICATIONS
Model Power Rating Impedance Attenuation [dB] Frequency Lead
TFA-68DD 30W 50ohms
+-1ohm		 10, 20, 30 DC-1GHz 　
TFA-53SD 0.25W 1,2,3,4,5,6,7,8,
9,10,20,30,40		 DC-4GHz 　
TFA-53SDL Leads
TFA-54DD 　
TFA-54DDL Leads
TFA-55SD 　
TFA-55DD 　
TFA-84SD 0.50W DC-1GHz 　
TFA-84SDL Leads
TFA-37DD 1.00W 　
TFA-37DDL Leads

Note 1:  Attenuation Tolerance at DC measuring as shown in following,
 1,2,3,4,5,6db: +/-0.2dB, 7,8,9,10dB: +/-0.3dB, 20,30,40dB: +/-0.4dB
 Note 2:  75 ohm characteristic impedance are available, please replace 7th character to C from D.

INSTALLATION

DIMENSIONS

Model

 A B C D E
TFA53

5.00

2.70

0.70

1.20

 0.80
TFA54S

5.00

3.80

0.70

1.20

 0.80
TFA54D

5.00

3.80

0.70

1.20

 0.80
TFA55S(TFA545S)

5.00

4.50

0.70

1.20

 1.00
TFA55D(TFA545D)

5.00

4.50

0.70

1.20

 1.00
TFA84S

8.00

5.25

0.70

1.40

 1.10
TFA84D

8.00

5.25

0.70

1.40

 1.10
TFA68D (Power)

6.70

8.65

1.05

1.00

 0.80
TFA37S

13.00

7.00

0.70

2.00

 1.40
TFA37D

13.00

7.00

0.70

2.00

 1.40

CHARACTERISTICS

Items

Specifications

Test Conditions

Characteristic Impedance

50 Ohms (D)

75 Ohms (C) available.

Tolerance of Impedance

+/- 2%(G)

Input DC resistance in terminating output with resistor.

Tolerance of Attenuation

　

Note 1

TC of Impedance

+/- 50ppm/C

TC of input DC resistance in terminating output with resistor.

TC of Attenuation

+/- 50ppm/C

Note 2

Rating Temperature

-55-70 degree C

 

Soldering Heat

+/- 1%

350C, 3 seconds dipping.

Soldering capability

95% covered

 

Humidity

+/- 1%

Note 3

Load Life

+/- 1%

Note 4

Operating Temperature

-55C - +155C

 

Storage Temperature

-55C - +155C

 

Note 1:  Output DC volt in terminating out put with resistor when stable 1V DC volt source connect to input.
 Note 2:  TC of output DC volt in terminating out put with resistor when stable 1V DC volt source connect to input.
Note 3:  Input DC resistance change Under condition of 40C temp and 90-95%RH, rating power ON-90min, OFF-30min, 1000h
Note 4:  Input DC resistance change.  Under condition of 70C temp, rating power ON-90min, OFF-30min, 1000h

Ordering Information

Ordering P/N

Type

Characteristic
Impedance

Attenuation

Tolerance of
Impedance

Rating Power

RoHS

TFA53SD15dBG000

TFA53SD

50ohm

15dB

G(2%)

1/4W

000: not

TFA54DD20dBG000

TFA54DD

50ohm

20dB

G(2%)

1/4W

000: not

TFA84DD20dBG000

TFA84DD

50ohm

20dB

G(2%)

1W

000: not

TFA68DD10dBG000

TFA68DD

50ohm

30dB

G(2%)

30W

000: not

Note 1: The 30W rating of TFA58DD assumes that the chip is attached on a proper heat sink using solder.

Copyright©, RARA Electronics Corporation
 Tel:82-32-817-4325 Fax:82-32-817-4329